The short answer for Sunblest Farms homeowners
Most Sunblest Farms homeowners replacing windows in 2026 pay between $550 and $1,300 per opening, installed, for a standard double-hung in a wood-framed wall. A whole house of 14 to 18 openings typically lands between $11,000 and $24,000.
Those two bands cover the large majority of jobs across central Indiana. The spread is wide because a window quote is really three prices stapled together: the unit, the labour, and whatever the crew finds after the old sash comes out. Here is how each of them moves.
Price per window, by frame material
Frame material sets the floor and everything else adjusts from there. The figures below are 2026 installed prices for a common 32-by-54 double-hung, including unit, labour, standard trim and cleanup.
| Frame | Installed, per window | What that buys |
|---|---|---|
| Builder-grade vinyl | $450 to $700 | Thin frame, basic balances, short glass warranty |
| Mid-grade vinyl | $650 to $1,050 | Fusion-welded frame, better balances, low-E and argon |
| Fiberglass | $1,000 to $1,700 | Narrow sightlines, very little thermal movement, paintable |
| Composite | $1,100 to $1,900 | Vinyl-level maintenance with wood-level stiffness |
| Clad wood | $1,300 to $2,400 | Wood interior with an aluminum or fiberglass exterior |
Vinyl, where most Sunblest Farms jobs land
The large majority of replacement work in this market is vinyl, and the reason is arithmetic rather than loyalty. A good mid-grade vinyl double-hung does most of what a fiberglass unit does for roughly sixty percent of the money. Where vinyl gets punished is on very wide openings and dark exterior colours, because the frame moves more with temperature, and Indiana hands it a hundred-degree swing between a January cold snap and an August afternoon.
Fiberglass and composite
These earn the premium in two specific situations. The first is any opening wider than about four feet, where a stiffer frame keeps the sash operating squarely for longer. The second is a dark exterior colour you want to stay looking sharp. Both also take paint, which matters if you expect to change the trim colour a decade from now.
Wood and clad wood
Clad wood is the right answer when the interior finish is the point: stained trim, deep sills, a room where a white vinyl frame would look wrong. Budget at least double a mid-grade vinyl unit and expect a longer lead time. A bare wood exterior in this climate is a maintenance commitment most homeowners regret by about year eight.
What to have ready before you call for quotes
Fifteen minutes of preparation changes the quality of every bid you receive.
- A written count by room, including basement and garage openings.
- Rough width and height of the three largest openings.
- Photographs of any sill you can dent with a thumbnail.
- A note of which windows sit in bedrooms, since those may have to meet egress sizing and that can force a larger, costlier unit.
- Your honest time horizon. Five more years in the house and twenty-five more years point at different frames.
Paying for it in 2026
Most quotes in this range arrive with financing attached. Read the term rather than the monthly payment. A promotional zero-percent period that reverts to a high rate on the full original balance is a common structure and an expensive surprise.
Federal energy-efficiency credits for windows have been revised and, at points, allowed to lapse. If a salesperson quotes you a specific dollar credit, treat it as a sales claim rather than a fact, and confirm what applies for the current tax year with a tax professional before it changes your budget. The same caution applies to utility incentives, which in Indiana more often cover insulation and heating equipment than windows.
If the total is uncomfortable, phase it. Take the north and west elevations first, since they carry the winter wind and the late summer sun, plus the worst individual units wherever they sit. Doing nothing for another year is also a decision: a failed seal never reseals, a soft sill keeps spreading into the framing, and a sash propped open with a stick in July is a security problem as well as an energy one.
What a whole-house job runs
Counting openings is the fastest route to a realistic number, and most people undercount. Basement sliders, the small bathroom awning, the fixed unit over the stair landing: every one of them gets quoted.
- 8 to 10 openings, a small ranch or bungalow: $6,000 to $12,000
- 12 to 16 openings, a typical two-story: $9,000 to $19,000
- 18 to 24 openings, larger or newer construction: $15,000 to $32,000
Where you land inside a band comes down to three things: the exterior cladding, how many openings sit on the second floor, and how many units are wider than four feet. A vinyl-sided ranch with ten ground-floor openings sits near the bottom. A two-story with brick veneer, six upstairs openings and a picture window sits near the top of the very same count.
Specialty units sit outside those bands. A bay or bow assembly typically runs $2,400 to $5,500 installed, because it carries a roof, a seat board and its own flashing detail. A sliding patio door usually lands between $2,000 and $4,500. A single large picture window can cost more than three small double-hungs beside it, purely on glass weight and the two-person handling it forces.
Insert versus full-frame replacement
When an insert is the right call
An insert, sometimes called a pocket window, drops a complete new unit inside the existing frame. It is faster, cheaper, and leaves interior and exterior trim alone. It is correct when the existing frame is square, dry and solid, which describes most homes built after roughly 1975.
When full-frame is the only honest answer
Full-frame strips the opening back to the rough framing. It costs roughly $150 to $400 more per window and adds time to the schedule, but it is the only way to address rotted sills, openings that have racked as the house settled, or the missing insulation you routinely find around a 1950s opening. If one contractor quotes insert pricing on a house with soft sills, you are not comparing bids. You are comparing scopes.
One trade-off nobody volunteers: an insert costs you glass. The new frame sits inside the old one, so you lose roughly one to three inches of visible glass in each direction. On a small bathroom window that is barely noticeable. On a bank of three living-room units it is the first thing you see.
Where your money actually goes
The unit
On a mid-grade vinyl job the window itself is usually 45 to 60 percent of the ticket. That share drops on an old house with damaged framing, where labour swallows more, and rises on a newer home where the crew is essentially doing a clean swap.
Labour and the opening
Figure 30 to 40 percent. A straightforward insert swap runs about an hour and a half per opening for a two-person crew. Second-story work off ladders or staging, brick and stone exteriors, and any opening needing sill repair can double that.
The line items people forget
Disposal of the old sash, aluminum capping over exterior trim, interior casing and paint touch-up, and a permit where the town requires one. Individually they are small. Together they commonly add $60 to $150 per opening, and they are the most frequent reason a low bid grows after the contract is signed.
A useful sanity check on any quote: divide the total by the opening count and see whether the per-opening figure fits the material band in the table above. If it sits well below, something is missing from the scope. If it sits well above, either the scope includes work you have not registered or the unit is not the one you think you are buying.